Odyssey Automotive Odyssey Automotive Cabinets Odyssey Automotive Vehicles Odyssey Automotive Spec Your Emergency Vehicle Online

Established in 1979 as the market pioneer, Odyssey Automotive Specialty, Inc. of Wharton NJ manufactures first response EMS units, Fire Chief, Command units, Specialty law enforcement and commercial vehicles based on sport utility vehicles, vans, trucks, trailers, light and medium duty rescues.

  • By using the following program you can "Spec-Out" an Emergency Response Unit and submit it to Odyssey for a proposal and information.
  • The following is our RESCUE / UTILITY conversion package. If you do not see it mention it in the notes section.
  • Chassis may be supplied by the customer, ordered and drop shipped to Odyssey or supplied through the Odyssey chassis network. Contact our sales department for pricing or our factory drop ship codes.
CONTACT INFORMATION (*) signify required fields.
Name:*
Title / Position:*
Company Name:*
Email Address:*
Phone Number:*
Fax Number:*
Street:*
City or Town:*
State:*
County:*
Zip Code:*
How did you hear of us?*
Magazine Ad
Budget Amount:*
What is your time-frame?*
Will you be going to bid?
Yes No
If so, do you need bid specifications?
Yes No
Preferred contact?*
  Keep informed of product specials and announcements with an occasional e-newsletter from Odyssey Automotive Specialty. You can quickly opt out at anytime if you no longer wish to receive it.
SPEC YOUR CONVERSION -
VEHICLE INFO:
MAKE PREFERRED : ENGINE :
YEAR:  
GVWR: CAB/ CHASSIS TYPE :
BODY TYPE : CHASSIS SUPPLIED BY:
ELECTRICAL
POWER PACKAGE:
High power 170 amp alternator (image)
Emergency Vehicle battery system
Odyssey automatic electronic engine idler unit.
IGNITION OVERIDE
Remove key from ignition securely.
BACK UP ALARM
Automatic sound level Adjusting.
POWER POINTS
12-Volt DC power outlets included on rear corners & front control console.
Custom receptacle in the grille area to an illuminated switch on the dash activated by ignition
Addition receptacle at rear bumper
120 VOLT ELECTRICAL
Installed in an above floor air tight compartment with interior cover & exterior access door. Remote panel on the interior.
110VOLT ALTERNATOR
5000 watt engine driven alternator.
INVERTER
Wired to battery system and transfer switch system

*Tips on selecting an inverter. Important
BATTERY CHARGER/ MONITOR
Shore power charger to battery system
Roof mounted solar charger to charge batteries
SHORE POWER INLET
Shore inlet with circuit protection and adapter
UNDERHOOD LINE
Underhood line for engine block heaters.
DISTRIBUTION PANEL
Custom panel with switches and circuit breakers
TRANSFER SWITCH
Automatic Transfer switch from shoreline to generator or inverter
EXTERIOR OUTLETS
Weatherproof GFI protected outlets on exterior of body
INTERIOR OUTLETS
Duplex GFI outlets on interior of body
UNDER HOOD LINE
Circuit protected line to existing engine block heater.
BLOCK HEATER
Add factory STD block heater.
Spring Back with 50' of 12/3 cable
Electric Rewind with 150' of 12/3 cable
EXTERIOR
LADDER CHUTE Double diamond plate compartment on the roof with access ladder on the rear
DOOR HARDWARE D-Ring handles with rotary slam latches
Automotive style latches with power door locks
DOOR STYLE Swing open style
Aluminum Roll up style
LOCKING SYSTEM Internal locking bar in rear compartments to lock and secure all compartments forward and rear. *Swing doors only.
LIGHTING All DOT lighting will be LED and all compartments include lighting activated with the opening of the doors. Ground lighting is also included to illuminate areas around the vehicle when the parking brake is set.
FRONT BUMPER Custom heavy duty steel bumper with grille guard, steel guides, frame mounted tow hooks and a 1/2" Teflon face.
Include winch: 12,000 LB Warn winch built into bumper
Grille guard to factory bumper - black, chrome, or stainless steel push bar with grille guard.
Include winch: 9,000 LB Warn winch hidden under bumper.
RUNNING BOARDS Diamond plate aluminum running boards & rear splash guards
  Running boards
TRUCK BED Bed liner Rhino Diamond plate Cap (use comments for details)
  Slide out storage (use comments to describe in detail) Lift up hatches on cap
GRAB HANDLES Non-Slip handles on the "B" pillars
MIRRORS Convex mirrors mounted below the OEM swing away mirrors
WHEEL SIMULATORS Polished stainless steel inserts on all wheels
REAR STEPS Fold down handle / Steps for roof access
LADDER On the rear of the body to access
Interior hatch with removable ladder to roof deck
TRAILER HITCH Heavy duty class 4 receiver hitch with wiring
GRAPHICS Scotchlite and computer generated exterior graphics. *Pricing is available after a design is submitted
WHEEL CHOCKS Wheel chocks and holder on the driver side under the body
AWNING One pull out awning with support legs

INTERIOR
CONSOLE State of the art "Firstline" electrical system including our eight switch lifetime circuit breaker switch panel with LED illuminated legends and the Odyssey custom "plug in" harness system with GXL function coded wiring
Computer mount
Mapbook extension on back of console
Handspot: Halogen handheld spotlight in custom mount.
Flashlight: Streamlight flashlight on console
Overhead speaker console
Cabinet-Spec-On Line Spec your cabinets in more detail.
WARNING SYSTEMS
LIGHT BAR(S)
Please specify light bar and include worksheet.
WARNING LIGHTS
LED LIGHTING
Front - on grille (total two)
Side Low - on front fenders and over rear wheels (total four)
Side High - on top of body (total four)
Rear Low - Above Tail lights (total two)
Rear High - Top of Body (total two)
SCENE LIGHTING
12 volt Halogen
Front - front edge of body (total two)
Side High - Top of body (total four)
Rear Low - Above tail lights (total two)
Rear High - Top of body (total two)
Light Tower - Extendable light tower with two 70 watt metal halide heads.
SCENE LIGHTING
120 VOLT AC HALOGEN
Front - on telescoping poles, 500 watt (total two)
Side High - Recessed into body, 500 watt (total two)
Rear High - On telescoping poles, 500 watt (total two)
Rear Low - Recessed into body, 500 watt (total two)
Light Tower - Two 500 watt heads.
Light Tower - Four 500 watt heads.
COMPARTMENT DOOR FLASHERS Red LED lights mounted on the inside of side compartment doors to warn oncoming traffic
GROUND LIGHTING Lighting mounted under each front entry door and the rear and sides of body to illuminate whenever the vehicle is placed in park
SIREN AND WARNING 100 watt Whelen siren to 1 speaker
200 watt Whelen siren to 2 speakers
AIR HORNS Dual air horns mounted in front bumper with compressor & tank
PERSONAL LIGHTING Streamlight SL40 Lightbox with charging rack
Streamlight SL20 flashlight
FIRE EXTINGUISHERS Fire extinguisher mounted in the cab and rear of the vehicle, 5 LB ABC style
AIR COMPRESSOR 12 volt DC compressor with holding tank to rear hose reel
COMMUNICATIONS EQUIPMENT
COMMUNICATION EQUIPMENT
Radio and antenna installation is available and can be quoted after a detailed list of equipment is submitted
VIDEO
Drop down 10" - 15" flat screen display
Wall mount 15" flat screen display
Backup camera with audio
Roof mounted camera
DVD-P recording device
WEATHER STATION
Wireless weather station on removable pole or tripod
SPECIAL WIRING
Exterior & interior panels for communications and video
DATA & LAND LINES
Exterior hook up to one interior panel, includes Cat5, voice and cable rF
ADDITIONAL COMMENTS HERE
Thanks for your input, please click submit
to access Odyssey's Spec Online section.

Enter the code
shown in the image:

(resets to default package)
ODYSSEY TERMS

Conversions: 35% down at the time of the order with the balance with all additions to be paid in full upon completion and acceptance of the unit.

Chassis: The chassis must be paid in full when it arrives at Odyssey. If two payments are more convenient then the chassis can be paid in full along with the conversion deposit. Any delay in payment will accrue a charge of $ 10.00 per day interest until the chassis is paid in full. Chassis must be paid in full when the chassis arrives at Odyssey.

Pricing: is subject to change but all quotations will be valid for 60 days. Chassis, quotations are subject to availability and is only valid at the date of the proposal. All quotations exclude any applicable sales or use taxes unless specified and included with the price. FOB-NJ

Applicable Law: The terms and provisions of this Contract and any dispute arising hereunder shall be governed and principles of law applied by the laws of the State of New Jersey. The courts of New Jersey shall have the sole and exclusive jurisdiction in any case or controversy arising under this Contract. Each party to this Contract, inclusive of its successors or assigns hereby submits and consents to the jurisdiction of the courts of the State of New Jersey and within which all such actions, unless otherwise provided for the arbitration of said disputes, shall be the proper venue for any such action.

Communications equipment: All customer supplied communications equipment must be complete, fully operational and programmed upon arrival at Odyssey. Equipment not complete will be installed in the designated locations with all wiring in place but not attached to the equipment. Odyssey's responsibility will end at that point and it will be necessary for your communications vendor to complete the installation. Odyssey shall not be responsible for any customer supplied equipment not 100% functional upon arrival. If you request the supplied equipment be serviced Odyssey will make the arrangements at a qualified local vendor. The department shall be responsible for any and all charges incurred. This service will postpone the start of production time quotations until the equipment is returned in working order. There are no warranties implied by offering this service.

Warranty: The chassis is warranted by the manufacturer of the chassis. Odyssey has a full limited warranty supplement that will be included with the owners manual upon delivery. If you would like a copy prior to contract please ask for a copy.

Production time: is 4 to 6 weeks depending on type of conversion and chassis details after arrival of the chassis at Odyssey and all plans are approved. If a contract and all approvals are submitted prior to the arrival of the chassis the production time will be considerably less. At any time during construction, consider yourselves our guests to stop by and view or discuss your conversion.

© 2010 Odyssey Automotive | All Rights Reserved