E-ONE CR 137 Aerial

Cab/Chassis:

• Cyclone® II or Quest® chassis with integral torque box frame.
• Medium or long cabs available.
• All E-ONE cabs meet or exceed SAE J2420, J2422 and ECE R-29 crash testing standards, the benchmarks for crash testing and safety in the commercial trucking industry.

All Extruded-Aluminum Construction:

• Using high strength 6061-T6 aluminum-alloy extrusions achieves a high strength-to-weight ratio resulting in an extremely strong and lightweight aerial ladder. The aluminum ladder is corrosion-resistant for extended years of service.
• adder sections are “K”-braced for added strength.
• Ladder rungs have an integral slip-resistant surface eliminating the need for rubber rung covers.
• The swirled, natural finish requires little maintenance and painting of the aerial is not required.
• Welds and associated ladder assemblies are easily inspected.

Waterway:

• The 1000 GPM pre-piped waterway is located at the end of the 4th section, providing a 110’ elevated master stream while maintaining a clear tip for rescue operations.

Aerial Height:

• 11’ - 10” Overall height with SideStacker or no pump style body; 12’ - 1” overall height with center hosebed
• Note: 11’ - 7” available with Cyclone II aerial cab.

Optional Fire Fighting Package:

• 1250-2000 GPM
• Hale or Waterou Pumps
• 300 or 500 gallon tank

Suspension Options:

• Taper leaf front suspension with adjustable shocks are standard.
• Available with Independent Front Suspension as well as Ridewell Dynalastic rear suspension for outstanding ride quality.

Body:

• Extruded aluminum body with several configurations available, including: SideStacker® hose bed, center hose bed and a “Truck Company” style with no pump or tank.

Stability:

• Two sets of criss-cross under-slung outriggers offer a lower center of gravity for improved handling and provide additional compartment space over each jack.
• A 13’ - 8” stabilizer spread allows the aerial to be set up closer to buildings tight, high-rise access lanes while maintaining full aerial rotation.

Load and Reach:

• The CR 137 aerial is rated in multiple configurations clearly shown on a permanently mounted load chart on the ladder base section.
• Tip-loads and distributed loads are graphically depicted eliminating the need for any auxiliary load sensing systems.
• An inclinometer is standard equipment on all load charts.
• With its industry-leading reach, the CR 137 provides quick access to building roof up to 13 stories high.